Glock 17, Gen 5, MOS issue
Results 1 to 3 of 3
  1. #1
    Junior Member
    Points: 14, Level: 1
    Level completed: 27%, Points required for next Level: 36
    Overall activity: 0%
    lawbrum319@yahoo.com's Avatar
    Join Date
    Oct 2020
    Posts
    1
    Rep Power
    0

    Glock 17, Gen 5, MOS issue

    Hey guys. Owned several Glocks for a long time and running into a new issues for me. I bought the new G17 MOS. I was provided the adapter plates with the gun. I have a Trijicon rmr. I use plate #2 and screw down the plate to the gun with the provided screws and small tool. I have now done this twice and both times the plate has bent. I go to attach the rmr to the plate and ti wont seat and then I see the bend again. Any help on what Im doing wrong. Im not really twisting hard enough to do this. I mean Im using the small little tool and Im just turning it until tension is tight so the rmr doesnt go flying off when firing. I appreciate any insight. I emailed Glock but God knows it will be a while before they respond

    thanks

  2. #2
    Senior Member
    Points: 771,362, Level: 100
    Level completed: 0%, Points required for next Level: 0
    Overall activity: 99.5%
    Otintx's Avatar
    Join Date
    Oct 2011
    Location
    South of Texas
    Posts
    6,060
    Glock Armorer?
    No
    Glocks Owned
    Several
    Rep Power
    19
    Sounds like the surface for the plate is not level or the plate has strength integrity issues.

    Maybe caliper the mos surface and verify it is a level plane and then approach Trijicon with the issue ?

    Josey Wales: When I get to likin' someone, they ain't around long.
    Lone Watie: I notice when you get to DISlikin' someone they ain't around for long neither.

  3. #3
    Super Moderator
    Points: 55,626, Level: 100
    Level completed: 0%, Points required for next Level: 0
    Overall activity: 99.6%
    __jb's Avatar
    Join Date
    Jul 2010
    Location
    Sunshine State
    Posts
    6,885
    Glock Armorer?
    Yes
    Glocks Owned
    Help... My Glocks have started multiplying...
    Rep Power
    22
    Quote Originally Posted by [email protected] View Post
    Hey guys. Owned several Glocks for a long time and running into a new issues for me. I bought the new G17 MOS. I was provided the adapter plates with the gun. I have a Trijicon rmr. I use plate #2 and screw down the plate to the gun with the provided screws and small tool. I have now done this twice and both times the plate has bent. I go to attach the rmr to the plate and ti wont seat and then I see the bend again. Any help on what Im doing wrong. Im not really twisting hard enough to do this. I mean Im using the small little tool and Im just turning it until tension is tight so the rmr doesnt go flying off when firing. I appreciate any insight. I emailed Glock but God knows it will be a while before they respond
    https://us.glock.com/en/contact-us

    If the plate bends tightening it down to the slide, seems like a Glock issue... Call them on the phone...
    "While the anti-gunners seem very concerned about the "one life" that your firearm might take -- they are not very concerned about the lives it will save." Jon H. Gutmacher, Florida Firearms - Law, Use & Ownership

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •